Description
- Healthy Material: Food Safe Stainless Steel for 2 rollers & all of the small screws. Aluminium Alloy for crank handle & hoppers. Stainless steel crusher , and environmental friendly, has good heat resistance, wear resistance, strong enough to last a lifetime.
- 7.7lb & Adjustable Rollers: 1MM hardened thickness hopper can holds up to 7.7LB grain at one time. Adjust the Roller Clearance: At first, loose the 2 knobs on both ends of the malt crusher, then adjust the gap according to the dial (0.025-0.1 inch) to obtain a right clearance for your grain.
- Drill Mode & Removable Crank Handle: You can remove the handle of this grain mill to attach a 3/8 inch drill at 200-300 RPM (Don't run at a very high speed ). Aluminum Alloy Handle is anti-skidding, more portable, and more beautiful than steel handle.
- Powerful 12TPI Knurl: Strong 12 TPI knurl rollers to efficiently pull the grain through the rollers while leaving the hull intact to form an excellent filter bed for sparging.
- Widely Used: This grain roller mill is designed for grains used in beer brewing, it can be used to crush barley, wheat, and malt etc. Can not be used to crush corns,soybeans, or sugarcanes.
Condition: New and good quality
Color: Silver
Type: Grain crusher
2 rollers: Stainless steel
Grinder housing: Aluminum
Hoppers: Stainless steel
Speed:8lbs/min(3.6KG/min)
Total height: 260mm(10.2")
Hopper dimensions at top: 220 x 210mm((8.7" x 8.3")
Footprint size of grinder: 140 x 80mm(9.4" x 3.1")
Roller dimension: 76 x 150 x 50mm(3" x 6" x 2")
Single roller: 38 x 150mm (1.5" x 6")
The ribbed rollers are adjustable at both ends of the slot.
roller adjustable approx. 0.1 - 2.5 mm
With 2 aluminum bars
Crank handle: 120mm(4.7")
NEW 2 Rollers Malt Mill,Grain Mill,Home Brew Mill,Barley Crusher Homebrew
Features:
Width and roller diameter is optimized for use with power drill
Adjustable rollers at both ends to give uniform crush
12 TPI knurl to efficiently pull grain through rollers while leaving hull intact to form an excellent filter bed for sparging
6" long adjustable gap
Fully adjustable mill
0.060" fixed primary gap, 0-0.065" fully-adjustable secondary gap
Dual eccentric adjusters built from stainless steel for no galling
8 lbs / minute is average throughput
6" x 1.5" diameter stainless steel rollers
Crankshaft can be turned clockwise or counterclockwise
Durable alloy frame
Heavy-duty two-roller mill with adjustable secondary gap-spacing
Integral drive shaft and axles
Mill can be hand-cranked or motorized with